Quick Overview
The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
Details
Rated Power: RMS Continuous Power 1500 Watts x 1 @ 4 Ohms
2500 Watts x 1 @ 2 Ohms
2500 Watts x 1 @ 1 Ohm
Two amplifiers in bdSYNC configuration: 5000 Watts x 1 @ 2-Ohms
Total Power: (Sum of Rated Power) 2500 Watts
Dynamic Power: (PVC/PowerCube Measurement) 2980 Watts
Bridgeable: Yes (two amps "strapped" using bd-Sync2 creates one monster amplifier)
Efficiency: 81.9% @ 4-Ohm
77.7% @ 2-Ohm
64.5% @ 1-Ohm
Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
Tone Controls Bass: 0dB to +18dB @ 45Hz
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
Signal Input Low level: 1 RCA pair
Signal Output Low Level: 1 RCA pair
Power Input: Connector Block
Power Wire: Gauge 1/0 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 16 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Remote PEQ
Visual Indicators: Power,Thermal, Protect
Circuit Topology Class: Class bd
Frequency Response: 20-250kHz +/- 0.5dB
Dimensions: (HxWxL) 2.14 x 8.14 x 21.875 (in)
 |